
澳特尔森过滤设备(上海)有限公司
地址:上海市松江区九泾路655号2号楼410室
电话:+86-021-67820268
传真:+86-021-67820268
Aatson Filtration Equipment (Shanghai) Co., Ltd.
Add: 410, Building No. 2, 655 Jiujing Road, Songjiang District, Shanghai
Tel: +86-021-67820268
Fax: +86-021-67820268
E-mail: sales@aatson.com
Web: www.a9719.com

刮刀式自清洗过滤器是一种自动刮除颗粒杂质系统。不仅适用于悬浮液的杂质分离过滤,而且可用于对粘稠液体的杂质分离,其结构稳固,运行稳定可靠,可用于严酷的工业环境。
Basic Specification:
Scraper-type self-cleaning filter is an automatic scraping particle impurity system. It is not onlyapplied for the separation and filtration of impurities in suspensions, but also for the separationof impurities in viscous liquids. Because of its stable structure, stable and reliable operation, itcan be used in the harshest industrial environment.
【结构及工作原理】:

刮刀式自清洗过滤器主要组件有:电机、电控箱、控制管路、主管组件、滤网组件、刮刀、框架组件、传动轴、进出口连接法兰等。自清洗过滤器克服传统过滤产品的纳污量小、易受污物堵塞、过滤部分需拆卸清洗且无法监控过滤器状态等众多缺点,具有对原水进行过滤并自动对滤网进行清洗排污的功能,且清洗排污时系统不间断供水,可以监控过滤器的工作状态,自动化程度很高。覆盖了由10um到3000um的各种过滤精度的需求。
刮刀式自清洗过滤器液体通过进口流入,通过滤元表面流向出口;当滤元表面杂质累积到一定程度时,滤元内外的压力差达到设定值,配有校正器的刮刀贴近滤元表面转动,对杂质进行刮除,杂质随滤元表面进入收集腔;当收集腔内的杂质达到一定量时,排污阀根据设定时间自动开启,将含有高浓度杂质的液体排出。全过程通过智能化PLC/PAC进行全自动控制。
Structure and working principle:The main components of the scraper type self-cleaning filter are: motor, electronic cabinet, control pipeline, main pipe components, strainer components, scraper, frame component, transmission shaft, import and export connecting flange, etc. Self-cleaning filter overcomes many shortcomings of traditional filter products, such as small contamination capacity, easy to be blocked by contaminants, the filter part needs to be disassembled and cleaned, and the filter status cannot be monitored. It has the function of filtering the raw water and cleaning the strainer and discharging sewage automatically. With a high degree of automation, the system provides continuous water supply when cleaning the sewage, which can monitor the filter working status. It covers all kinds of filtering accuracy requirements from 10um to 3000um.
The liquid of scraper self-cleaning filter flows through the inlet and flows to the outlet through the surface of the filter element. When the impurities on the surface of the filter element accumulate to a certain extent and the pressure difference between the inside and outside of the filter element reaches the set value, the scraper with a corrector rotates close to the surface of the filter element to scrape the impurities, and the impurities enter the collection chamber with the surface of the filter element. When the impurities in the collection chamber reach a certain amount, the drainage valve opens automatically according to the set time, the liquid containing high concentration impurities can be discharged automatically. The whole process is fully automatic controlled by intelligent PLC/PAC.
【主要特点】:
■ 自动清洗,自动排渣,无需抛弃型耗材(如:滤袋、滤芯)。
■ 气动或电动驱动,供客户随意选择。
■ 完全在线过滤,在线清洗,无须关闭进口阀门。
■ 液体损失极少,可控制在1%以内。
■ 主要应用于高粘度、高腐蚀性液体,粘度达 800000cp。
Main features:
● Automatic cleaning, automatic slag discharge, without discard consumables (such as filter bags, filter cartridges).
● Pneumatic or electric drive, for customers to choose randomly.
● Fully on-line filtering, on-line cleaning, without closing the inlet valve.
● The loss of liquid is very small and can be controlled within 1%.
● It is mainly applied to high viscosity and corrosive liquids with a maximum viscosity of 800000 CP.
【产品分类】:
Product classification:
名称 |
型号 |
说明 |
内刮刀式自清洗过滤器 |
CSI |
由电机驱动刮刀片旋转刮除滤网内表面杂质 |
外刮刀式自清洗过滤器 |
CSO |
由电机驱动刮刀片旋转刮除滤网外表面杂质 |
刮盘式自清洗过滤器 |
CSS |
由气缸驱动刮盘上下刮除滤网内表面杂质 |

应用于水处理、石化、冶金、电力、精细化工、涂料、油墨、造纸、食品饮料、制药、金属加工等行业。
适用液体类型 水、冷却液、食用油、涂料、树脂、粘合剂、油墨、颜料、聚合物、煤油、柠檬酸、发酵液、蛋白质、肥皂、山梨醇、湿部助剂、橡胶、乙醇、巧克力、糖果、高温油、果汁、柴油等。
Industry applications:
It is applied to water treatment, petrochemical, metallurgy, power, fine chemical industry, paint, ink, paper making, food and beverage, pharmaceutical, metal processing and other industries.
Applicable liquid type: water, coolant, edible oil, paint, resin, adhesives, ink, pigments, polymers, kerosene, citric acid, fermentation broth, protein, soap, sorbitol, wet end additives, rubber, ethanol, chocolate, candy, high temperature oil, fruit juice, diesel, etc.
【参数表】:
Parameter table:
CSI(内刮刀式自清洗过滤器Internal Scraper Self-cleaning Filter ) |
||||||||||
型号 |
理想流量 |
过滤面积 |
筒体直径 |
设备高度 |
进出口尺寸 |
排污口尺寸 |
电机功率 |
|||
CSI11 |
4.2-12.6 |
0.11 |
219 |
1000 |
DN20-DN50 |
DN25 |
0.37 |
|||
CSI21 |
6.5-22.4 |
0.21 |
273 |
1100 |
DN25-DN80 |
DN40 |
0.37 |
|||
CSI43 |
7.4-48.5 |
0.43 |
273 |
1300 |
DN40-DN100 |
DN40 |
0.55 |
|||
CSI71 |
12.3-84.8 |
0.71 |
426 |
1600 |
DN80-DN150 |
DN50 |
0.55 |
|||
CSI100 |
18.5-125.3 |
1.00 |
426 |
1900 |
DN80-DN150 |
DN50 |
0.75 |
|||
CSI125 |
23.5-158.2 |
1.25 |
530 |
2100 |
DN100-DN200 |
DN80 |
1.10 |
|||
CSI150 |
26.6-208.6 |
1.50 |
530 |
2300 |
DN100-DN200 |
DN80 |
1.10 |
|||
1、过滤精度:30μm-3000μm |
||||||||||
2、使用温度:200°以下(实际情况与密封材质有关) |
||||||||||
3、适用液体粘度:1-800000cp |
||||||||||
4、滤网类型:内圆网(V型楔形网、O型冲孔网) |
||||||||||
5、标准工作压力:0.1-1MPa |
||||||||||
6、刮刀类型:PTFE条状刮刀片/不锈钢刷,可选用不同特性的改性四氟 |
||||||||||
7、电动驱动:电动马达驱动,三相,380V |
||||||||||
8、电动阀:气动电动阀,气源要求: 5 SCFM(m 3 /h); 压力0.4MPa-0.8MPa |
||||||||||
9、理想流量:精度为100μm时的水流量,仅供参考,流量受到粘度、精度及洁净度的综合影响 |
||||||||||
|
|
|
|
|
|
|
|
|||
如需其它规格,可联系我司技术人员咨询! |
||||||||||
CSO(外刮刀式自清洗过滤器External Scraper Self-cleaning Filter) |
|||||||||
型号 |
理想流量 |
过滤面积 |
筒体直径 |
设备高度 |
进出口尺寸 |
排污口尺寸 |
电机功率 |
||
CSO11 |
4.2-12.6 |
0.11 |
273 |
1000 |
DN20-DN50 |
DN25 |
0.37 |
||
CSO21 |
6.5-22.4 |
0.21 |
325 |
1100 |
DN25-DN80 |
DN40 |
0.37 |
||
CSO43 |
7.4-48.5 |
0.43 |
325 |
1300 |
DN40-DN100 |
DN40 |
0.55 |
||
CSO71 |
12.3-84.8 |
0.71 |
480 |
1600 |
DN80-DN150 |
DN50 |
0.55 |
||
CSO100 |
18.5-125.3 |
1.00 |
480 |
1900 |
DN80-DN150 |
DN50 |
0.75 |
||
CSO125 |
23.5-158.2 |
1.25 |
630 |
2100 |
DN100-DN200 |
DN80 |
1.10 |
||
CSO150 |
26.6-208.6 |
1.50 |
630 |
2300 |
DN100-DN200 |
DN80 |
1.10 |
||
1、过滤精度:20μm-3000μm |
|||||||||
2、使用温度:200°以下(实际情况与密封材质有关) |
|||||||||
3、适用液体粘度:1-800000cp |
|||||||||
4、滤网类型:外圆网(V型楔形网、O型冲孔网) |
|||||||||
5、标准工作压力:0.1-1MPa |
|||||||||
6、刮刀类型:弹性不锈钢刮刀片 |
|||||||||
7、电动驱动:电动马达驱动,三相,380V |
|||||||||
8、电动阀:气动电动阀,气源要求: 5 SCFM(m 3 /h); 压力0.4MPa-0.8MPa |
|||||||||
9、理想流量:精度为100μm时的水流量,仅供参考,流量受到粘度、精度及洁净度的综合影响 |
|||||||||
|
|
|
|
|
|
|
|
||
如需其它规格,可联系我司技术人员咨询! |
|||||||||
CSS(盘刮式自清洗过滤器Disc Scraper Self-cleaning Filter) |
|||||||||
型号 |
理想流量 (m3/h) |
过滤面积 |
筒体直径 |
设备高度Equipmentheight |
进出口尺寸 |
排污口尺寸 |
电机功率 |
||
CSS11 |
4.2-12.6 |
0.11 |
219 |
1000 |
DN20-DN50 |
DN25 |
0.37 |
||
CSS21 |
6.5-22.4 |
0.21 |
273 |
1100 |
DN25-DN80 |
DN40 |
0.37 |
||
CSS43 |
7.4-48.5 |
0.43 |
325 |
1200 |
DN40-DN100 |
DN40 |
0.55 |
||
CSS71 |
12.3-84.8 |
0.71 |
426 |
1600 |
DN80-DN150 |
DN50 |
0.55 |
||
CSS100 |
18.5-125.3 |
1.00 |
480 |
1900 |
DN80-DN150 |
DN50 |
0.75 |
||
CSS125 |
23.5-158.2 |
1.25 |
530 |
2100 |
DN100-DN200 |
DN80 |
1.10 |
||
CSS150 |
26.6-208.6 |
1.50 |
630 |
2300 |
DN100-DN200 |
DN80 |
1.10 |
||
1、过滤精度:10μm-3000μm |
|||||||||
2、使用温度:200°以下(实际情况与密封材质有关) |
|||||||||
3、适用液体粘度:1-800000cp |
|||||||||
4、滤网类型:内圆网(V型楔形网、O型冲孔网) |
|||||||||
5、标准工作压力:0.1-1MPa |
|||||||||
6、刮刀类型:PTFE环型刮刀,可选用不同特性的改性四氟 |
|||||||||
7、动力方式:气缸驱动 |
|||||||||
8、电动阀:气动电动阀,气源要求: 5 SCFM(m 3 /h);压力0.4Mpa-0.8MPa |
|||||||||
9、理想流量:精度为100μm时的水流量,仅供参考,流量受到粘度、精度及洁净度的综合影响 |
|||||||||
|
|
|
|
|
|
|
|
||
如需其它规格,可联系我司技术人员咨询! |
【选型说明】:
Selection explanation
CSI11 - F50 - 304 - V - PN10 - PS |
||||||
型号 |
接口尺寸 |
壳体材质 |
密封材质 |
压力等级 |
表面处理 |
|
CSI11 |
F:法兰连接 |
304 |
V:氟橡胶 |
PN6 |
PS:喷砂
sandblasting
PG:抛光
polishing
PQ:喷漆
painting
PF:防腐涂层
anti-corrosion painting
|
|
CSO11 |
||||||
CSS11 |
||||||